The S10 Bluetooth Speaker units are part of our presets: TMA-2 Move Wireless (link) & TMA-2 Move XE Wireless (link). You can also add them to your custom TMA-2 set in our TMA-2 Builder.
With the S10 Speaker units in your headphones, you can connect wirelessly to your device via bluetooth.
Bluetooth Pairing - Connecting the S10 Speaker units via Bluetooth:
Option 1
When S10 is turned off: Press and hold the joystick button straight down until LED 1) Turns on, 2) Turns White, 3) Starts flashing rapidly
Option 2
Power on S10’s: Press and hold the joystick button straight down until LED turns on.
Enter pairing-mode: Hold the joystick to the right until the LED starts blinking rapidly.
When the LED is flashing rapidly, your S10 Speaker units are in pairing mode and ready to connect. Activate pairing mode on your connecting device and look for "AIAIAI TMA-2 (S10)".
Below you will find a video demonstration of the pairing process
Connecting the S10 Speaker units via Cable:
Insert one of our cables on the bottom input on the speaker unit marked L, twist to lock and secure the cable.
Please note that there is no cable lock on the top (between the headband and speaker unit)
You can use any of our cables. Find our selection here
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article