Getting Started with TMA-2 DJ WIRELESS

Modified on Thu, 27 Mar at 2:52 PM

Included in TMA-2 DJ Wireless
X03 Transmitter - S11 Speaker units - H02 Headband - E02 Earpads - C05 Cable - A01 Protective pouch.

Click here to go to the product page

Product manuals

Link to: S11 Speaker Units
Link to: X03 Transmitter

Step 1: Headphones Assembly

This step applies to all TMA-2 presets including custom built.

Attach the speaker units to the headband

Slide the speaker units onto the headband. Match the Right Side speaker unit with the Right Side plug (marked with red). Make sure the text on the speaker units is facing upright. See video demonstration below.

Attach the Earpads to the Speaker units

Attach the earpads to the speaker units. See video demonstration below.

Step 2. How to connect DJ Wireless: Wireless+ Ultra-low Latency Mode, Bluetooth, or Cable

Find a step-by-step guide for the different ways to connect our DJ Wireless headphones

W+ Link Ultra-low Latency Mode

Power on S11

Hold in the joystick until the LED turns on.

Power on X03

Hold the control button until the LED turns on

Pairing Complete

S11 and X03 will pair automatically. The LEDs will be constant white to confirm successful pairing.

Connect X03 to your device using mini-jack or USB-C

Bluetooth Mode

Switch to Bluetooth Mode

Double push the joystick on S11, and the LED will turn blue.

Connect to Bluetooth

Find “AIAIAI S11” in your Bluetooth settings and click “Pair”.

Connecting S11 to a new device

From off: Hold the joystick for 4 sec, until the LED starts flashing fast (0.3 sec on, 0.3 sec off).

From on: Hold the joystick right for 2 sec, until the LED starts flashing fast (0.3 sec on, 0.3 sec off).

Cable

Turn off S11

Hold in the joystick for 2 seconds, until the LED turns off.

Connect your AIAIAI TMA-2 cable to the lower input on the left speaker unit

Twist the connector clockwise to lock in place.

How to Customise your sound

1. Download the AIAIAI app:

2. Connect S11 to your phone using Bluetooth.

3. Go to ‘Sound Profiles’ in the AIAIAI app and adjust the EQ.

How to Connect to a New Device

S11: From power off, hold in the joystick for 4 seconds, until the LED starts flashing fast.
X03: With power off, hold the button for 4 sec, until the LED starts flashing fast.