Go to the bottom of the page for PDF version
Compatible with X03 Transmitter
Button Functions
- Turn on X03: Hold the button for 2 seconds, until the LED turns on.
- Turn off X03: Hold the button for 2 seconds, until the LED turns off.
- Check battery level: Push the button once.
- Red: <10 hours.
- Amber: 10-20 hours.
- Green: 20+ hours.
- Enter pairing mode: With power off, hold the button for 4 sec, until the LED starts flashing fast.
- Reset S11 paired devices: With power off, hold the button for 8 sec. The LED will flash fast when reset.
X03 LED FEEDBACK
| State | LED Feedback |
| Not paired (Idle mode) | LED flashing white (1 sec on, 1 sec off, loop) |
| Pairing mode | LED flashing white (0.3 sec on, 0.3 sec off, loop) |
| Paired | Constant white |
| Reset paired device list | LED flashing fast 5 times (0.1 sec on, 0.1 sec off) |
| Battery status (power on) | Push the control button. Battery is displayed for 3 sec. 20 - 40 hours - Constant green 10 - 20 hours - Constant amber 3 - 10 hours - Constant red 0 - 3 hours - Flashing red (0.3 sec on, 0.3 sec off) |
| Low battery indicator (power on) | Flashing red (0.3 sec on, 0.3 sec off) |
| Charging (power on) | Battery status is shown for 3 sec after USB-C charger connected Check battery status by pressing the button |
| Charging (power off) | Fully charged - Constant green 20 - 40 hours - Flashing green (1 sec on, 1 sec off) 10 - 20 hours - Flashing amber (1 sec on, 1 sec off) 0 - 10 hours - Flashing red (1 sec on, 1 sec off) |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article