Here, you can find the product manuals for the S11 Speaker Units and X03 Transmitter, the main components in our TMA-2 DJ WIRELESS Headphones. You can learn about the buttons, their functions, playback controls and LED feedback.
Jump to section..
- S11 Speaker Units - Product Manual
- X03 Transmitter - Product Manual
- Video guides
- Download the PDF Product Manuals
S11 Speaker Units - Product Manual
Compatible with X03 Transmitter
S11 Functions - General | Functions - Bluetooth mode only |
|---|---|
Adjust the volume: Push the joystick up or down. Choose mode: Double push the joystick.
Enter pairing mode:
See LED Feedback guide for more details
Check battery level: Turn off S11, LED shows level for 1 sec.
Battery level can also be monitored on your connected Bluetooth device Reset S11 paired devices: With power on, hold the joystick to the right for approx. 10 sec. The LED will flash when reset. | Play/Pause: Push the joystick in. Next/previous track: Push the joystick left or right. Answer/end incoming call: Push the joystick in once. Mute/unmute mic during ongoing call: Hold the joystick left for 2 sec. Activate assistant: Hold the joystick up for 2 sec.
|
S11 LED FEEDBACK
| State | LED | |
|---|---|---|
| Bluetooth Mode | W+ Link Ultra Low Latency | |
| Not paired (idle mode) | Flashing blue (1 sec on, 1 sec off, loop) | Flashing white (1 sec on, 1 sec off, loop) |
| In pairing mode | Flashing blue (0.3 sec on, 0.3 sec off, loop) | Flashing white (0.3 sec on, 0.3 sec off, loop) |
| Paired and connected | Constant blue | Constant white |
| Resetting pairing | Flashing blue 5 times (0.1 sec on, 0.1 sec off) | Flashing white 5 times (0.1 sec on, 0.1 sec off) |
| Battery indicator (Displayed for 1 sec after power off) | 10 - 20 hours - Constant green 1.5 - 10 hours - Constant red Less than 1.5 hours - Flashing red (0.3 sec on, 0.3 sec off) | |
| Low battery indicator (Power on) | Flashing red (0.3 sec on, 0.3 sec off) | |
| Charging | Fully charged - Constant green 10-20 hours - Flashing green (1 sec on , 1 sec off) 0 - 10 hours - Flashing red (1 sec on, 1 sec off) | |
X03 Transmitter - Product Manual
Compatible with S11 Speaker Units
X03 Button Functions
- Power X03 ON: Hold the button for 2 seconds, until the LED turns on.
- Power X03 OFF: Hold the button for 2 seconds, until the LED turns off.
- Check battery level: Push the button once.
- Red: <10 hours.
- Amber: 10-20 hours.
- Green: 20+ hours.
- Enter pairing mode: With power off, hold the button for 4 sec, until the LED starts flashing fast.
- Reset S11 paired devices: With power off, hold the button for 8 sec. The LED will flash fast when reset.
X03 LED FEEDBACK
| State | LED Feedback |
| Not paired (Idle mode) | LED flashing white (1 sec on, 1 sec off, loop) |
| Pairing mode | LED flashing white (0.3 sec on, 0.3 sec off, loop) |
| Paired | Constant white |
| Reset paired device list | LED flashing fast 5 times (0.1 sec on, 0.1 sec off) |
| Battery status (power on) | Push the control button. Battery is displayed for 3 sec. 20 - 40 hours - Constant green 10 - 20 hours - Constant amber 3 - 10 hours - Constant red 0 - 3 hours - Flashing red (0.3 sec on, 0.3 sec off) |
| Low battery indicator (power on) | Flashing red (0.3 sec on, 0.3 sec off) |
| Charging (power on) | Battery status is shown for 3 sec after USB-C charger connected Check battery status by pressing the button |
| Charging (power off) | Fully charged - Constant green 20 - 40 hours - Flashing green (1 sec on, 1 sec off) 10 - 20 hours - Flashing amber (1 sec on, 1 sec off) 0 - 10 hours - Flashing red (1 sec on, 1 sec off) |
Video guides
Download the PDF Product Manuals:
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article