Connecting H10 Headband: Bluetooth & Wireless+

Power ON/OFF

H10 Headband: 

• Choose mode of function on the switch - Blue for Bluetooth / White for W+ link
• Press and hold the middle button until the LED turns on (approx. 3 sec)

X01 Transmitter (Default W+ option for H10): 

• Press and hold the button until the LED’s turns on (approx. 3 sec)

X02 Transmitter (H10 firmware update required): 

• Connecting to audio using USB-C:
  • X02 turns on when connected

• Connecting to audio using 3.5mm mini-jack:     
  • Connect the USB-C socket to a 5V/>2A adapter (ex. phone charger or power bank).

Option 1: Wireless+ Link for wireless ultra-low latency

1. Slide the switch on your H10 headband to W+ Link mode (white) and power on
2. Enter pairing mode on H10: Press and hold the top and bottom button until LED flashes quickly

Pairing with X01 Transmitter (Default for H10):

• Power on X01.
• Double press the button to enter pairing mode (LEDs blinking fast).
• Pairing is successful when the LED on H10 and X01 both are solid white.

Pairing with X02 Transmitter (Make sure the firmware on your H10 is updated to be compatible with X02):

• Connect X02 to power-source. 
• The first time X02 is powered on, it will start in pairing mode automatically. To enter pairing mode manually: Hold the button on X02 for 2 sec.
• LED 1 is solid white when the first device pairs. If you have a second device, LED 2 is solid white when it pairs.

Video demonstration for pairing H10-X01:

Video demonstration for pairing H10-X02 (IF HAVE)

Option 2: Bluetooth Pairing

1. Slide the switch on your H10 headband to Bluetooth mode (blue) and power on
2. Enter pairing mode on H10: Press and hold the top and bottom button until LED flashes quickly (approx. 3 sec)
3. Activate pairing mode on your connecting device and look for "AIAIAI TMA-2 (H10)".
4. Pairing is successful when the LED on the H10 headband is solid blue.