How do I firmware update my headphones?

Updating Your Speaker Units

Compatible Models:
S10 speaker unit, TMA-2 Move Wireless, TMA-2 Move XE Wireless

Important:

Note: The firmware is currently only available for Windows 10 or newer (64-bit).

Firmware 1.1.2 (Latest Improvements):

• Enhanced audio prompts
• Improved fast charging
• Various minor improvements

Update Instructions:

1. Download the AIAIAI Updater for Windows: [https://aiaiai-updater.s3.eu-central-1.amazonaws.com/releases/AIAIAI+Updater+Setup+2.0.0-beta.5.exe]
2. Install the Updater:
   • Open the downloaded file and complete the installation.
   • Ensure you select Qualcomm USB Debug Drivers during the Qualcomm Combo Digital Architecture Drivers setup.
3. Connect Your S10:
   • Use a USB-C cable to connect your S10 to your PC.
4. Update the Device:
   • Select S10 in the Updater and click Update.
   • Confirm the correct product and complete the update.

Troubleshooting:
If the AIAIAI Updater cannot connect to your device immediately after installation, please reboot your computer and try again.

Updating Your Headband

Compatible Model:
H10 Headband, TMA-2 Studio Wireless+

Firmware 1.2.5 (Latest Improvements):

• Volume settings saved between power cycles
• No auto shut down during Skype/Teams calls
• Various minor improvements

Update Instructions for iOS:

1. Download the AIAIAI AUDIO H10 App: [Download Link]
2. Prepare Your H10:
   • Switch your H10 to Bluetooth mode and connect it to your phone.
   • Enter pairing mode by pressing the volume up and down buttons simultaneously for 4 seconds.
3. Follow App Instructions:
   • Launch the app and follow the on-screen instructions to complete the update.

Update Instructions for Windows:

1. Download the AIAIAI Updater for Windows: [Download Link]
2. Install the Updater:
   • Open the downloaded file and complete the installation.
   • Ensure you select Qualcomm USB Debug Drivers during the Qualcomm Combo Digital Architecture Drivers setup.
3. Prepare Your H10:
   • Turn on your H10 in Bluetooth mode (switch on the headband must be set to Bluetooth).
4. Connect Your H10:
   • Use a USB-C cable to connect your H10 to your PC.
5. Update the Device:
   • Select H10 in the Updater and click Update.
   • Confirm the correct product and complete the update.

Important:

Note: The Windows Updater only supports firmware version 1.1.2.

Please do not hesitate to contact our Support Team if you have any questions or concerns — we are here to help!