H10 Headband & X01 Transmitter: Product Manuals

Modified on Wed, 16 Apr at 12:40 PM

Here, you can find the product manuals for the main components in our TMA-2 Studio Wireless+ headphones, the H10 Headband and X01 Transmitter. You can learn about the buttons, their functions, playback controls and LED feedback.


Jump to section..




H10 Headband - Product Manual



H10 General Functions

Bluetooth only:
Choose mode: Flip switch
  • White: W+ Link ultra- low latency mode
  • Blue: Bluetooth mode: LED 

Power H10 ON/OFF
  • Power H10 ON: Push middle button until LED turns on
  • Power H10 OFF: Push middle button until LED turns on

Enter pairing mode: Push top and bottom button until LED flashes rapidly

Playback Controls:
  • Play/Pause: Push middle button (single press)
  • Next track: Push middle button (double press)
  • Previous track: Push middle button (triple press)
  • Volume up: Push top button
  • Volume down: Push bottom button
Call/Assistant:
  • Answer incoming call: Push middle button (single press)
  • End current call: Push middle button (single press)
  • Reject incoming call: Push and hold middle button (1.5 sec)
  • Activate assistant: Push top and bottom button (1.5 sec)


H10 LED Feedback

StateLED Response
BluetoothW+ Link
Power ONOn, BlueOn, White
Power OFFOffOff
ConnectedStatic BlueStatic White
Idle (Not Connected)Blinking Blue (1s off, 1s on, loop)Blinking White (1s off, 1s on, loop)
Idle (Battery level <10%)Blinking Red (1s off, 1s on, loop)Blinking Red (1s off, 1s on, loop)
Charging (0-50%)Blinking Red (1s off, 1s on, loop)Blinking Red (1s off, 1s on, loop)
Charging (51-99%)Blinking Green (1s off, 1s on, loop)Blinking Green (1s off, 1s on, loop)
Charging (100%)Static GreenStatic Green
Mode switch working W+ Link-->BTBlinking Blue (1s off, 1s on, 2 cycles)Blinking White (1s off, 1s on, 2 cycles)
Pairing modeBlinking Blue (300ms off, 300ms on, loop)Blinking White (300ms off, 300ms on, loop)







X01 Transmitter - Product Manual


X01 General Functions

Power X01 ON: Push button until LED turns on (approx. 3 sec)

Power X01 OFF: Push button until LED turns off (approx. 3 sec).


Enter pairing mode: Double push button so LED flashes rapidly (power on).


Hard reset device: Push button (approx. 7 sec).


LED battery level indicator:

  • <25% battery: LED one flashes.
  • 25-50% battery: LED one-two static.
  • 50-75% battery: LED one-two-three static.
  • 75-100% battery: All LEDs static.





X01 LED Feedback

StateLED Response
Power OnSolid light (3 sec), matching battery level
Power OffLED
Turned On, idle and no linkSolid Light LED 1 (1 sec on,1 sec off)
Turned On, idle and linked to H10Solid Light LED 1
Enter pairing modeAll LED's blinking (300ms on, 300ms off) loop
Hard reset device5 short flashes on all LEDs (< 0.5 sec on < 0.5 sec off)


 

Download the PDF Product Manuals below:

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article