Getting Started - TMA-2 Studio Wireless

Modified on Thu, 25 Sep at 10:05 AM

What’s included: H03 headband, S11-X03 Speaker unit & Transmitter, E04 Earpads. C05 Cable, A01 Pouch, Ableton Live Lite.

https://aiaiai.audio/headphones/tma-2-studio-wireless

Assembly:

Slide the right speaker unit onto the right side of the headband, and the left speaker unit onto the left side.

Ensure each speaker is upright to avoid sound issues.

Attach the earpads and connect either by cable or wireless.

Connecting to the transmitter

Press and hold the joystick on the speaker unit right for 2 seconds until the LED flashes rapidly.
Power on the speaker unit by pressing the joystick for 4 sec until the LED flashes rapidly.
Pairing is successful when LED is solid

Click here for a video demonstration of the speaker unit & transmitter pairing

Connecting via Bluetooth

Switch to Bluetooth by double clicking the joy stick so the LED turns blue
Hold the joystick right for 2 sec, until the LED starts flashing rapidly (0.3 sec on, 0.3 sec off).
Enable Bluetooth on your device find “AIAIAI S11” and connect

Click here for a video demonstration of Bluetooth pairing

Cabled connection

Turn off S11
Connect the cable to your left speaker unit and twist the cable to lock in place.

Customizing your sound

Tune the frequency response to your preferences with the predefined sound profiles or customizable 5-band EQ with the AIAIAI mobile app.

Connect S11 to your phone using Bluetooth.
Go to ‘Sound Profiles’ in the AIAIAI app and adjust the EQ.

Please note: EQ settings (presets or custom EQ setups) set in the AIAIAI app will work when connected to transmitter (W+ mode) and connected via Bluetooth.