Getting Started - TMA-2 Studio Wireless+

What's included: H10 Headband, X01 Transmitter, S05 Speaker units, E08 Earpads, A01 Pouch. https://aiaiai.audio/headphones/tma-2-studio-wireless-plus

Assembly

Slide the right speaker unit onto the right side of the headband, and the left speaker unit onto the left side.

Ensure each speaker is upright to avoid sound issues.

Attach the earpads and connect either by cable or wireless.

Connecting to the transmitter (Low latency)

On the headband: 

1. Slide the switch on the headband to white (W+ link mode) and power on
2. Press and hold the the top and bottom button until LED flashes quickly

On the transmitter:

1. Double press the button to enter pairing mode until LED flashes quickly
2. Pairing is complete when the LED on the headband and transmitter both are solid white

Click here for a video demonstration of the headband and transmitter pairing

Connecting via Bluetooth

1. Slide the switch on the headband to blue (Bluetooth mode) and power on
2. Press and hold the top and bottom button until LED flashes quickly
3. Activate pairing mode on your device and connect to "AIAIAI TMA-2 (H10)"
4. Pairing is complete when the LED on the headband is solid blue. 

Multiple device connection

Connect two devices to one transmitter (two headphones OR one headphone + UNIT-4 studio monitor).

To do so requires: 

• X02 transmitter
• Firmware updated headband (Find our firmware update here).

1. If connecting to audio using USB-C the X02 transmitter will power on when connected.
2. If connecting to audio using 3.5mm mini-jack: Connect the USB-C socket to a phone charger (5V/>2A adapter) 

TMA-2 Studio Wireless+ Features and Modularity