How do I setup TMA-2 DJ XE?

Slide the speaker units onto the headband, attach the earpads, and plug in the cable.

Before you start

In the box: S01 Speaker Units (2), E02 Earpads (2), an H01 Headband, a C05 Cable with a 6.3 mm adapter, and an A01 Protective pouch.

Steps

Put the headphones together

1. Slide the right speaker unit onto the right side of the headband, and the left speaker unit onto the left. The right side is marked R and red.
2. Check that the text on each speaker unit faces upright. If one is upside down, the sound can be wrong.
3. Press the earpads on. Line the four knobs up with the four holes on the speaker unit.

Watch the speaker units go onto the headband:

Plug in the cable

Plug the cable into the speaker unit on the side you prefer.

Watch the earpads and the cable go on:

If it doesn't work

• The sound seems wrong, or one side is quiet. Take the speaker units off and put them on again. The right side, marked R and red, goes on the right, and the text on each speaker unit faces upright.
• You still hear only one side. Please see Why can I hear sound in only one ear of my headphones?