Getting Started - TMA-2 DJ Wireless

Modified on Thu, 23 Oct at 1:34 PM

What’s included: H02 headband, S11-X03 Speaker unit & Transmitter, E02 Earpads. C05 Cable, A01 Pouch.

https://aiaiai.audio/headphones/tma-2-dj-wireless

Assembly

Slide the Speaker Units onto the Headband. Align the sides marked R (right, red) and L (left) so they match correctly. The right side plug (marked red) connects to the Speaker Unit also marked with R and red input.
- Make sure the text on the Speaker Units is facing upright to ensure proper sound orientation and avoid sound issues.
Attach the Earpads

See our general TMA-2 assembly guide with videos here.

Connecting to the transmitter (White LED)

S11 Speaker Units and X03 Transmitter is already paired out of the box. But if you need to connect them, follow the directions below

Enter pairing mode with X03 Transmitter: From OFF: Press the button for 4 sec until the LED starts flashing rapidly.
Enter pairing mode with S11 Speaker Units:
- If S11 is OFF: Press the joystick down for 4 sec until the LED starts flashing rapidly.
- If S11 is ON: Hold the joystick on the speaker unit to the right for about 2 sec until the LED flashes rapidly.
Pairing is successful when LED is solid white.

Connecting via Bluetooth (Blue LED)

Switch to Bluetooth by double clicking the joy stick so the LED turns blue
Hold the joystick to the right for 2 sec, until the LED starts flashing fast (0.3 sec on, 0.3 sec off).
Enable Bluetooth on your device find “AIAIAI S11” and connect.
Pairing is successful when LED is solid blue.

Video Guide - Pairing with Transmitter Video Guide - Pairing Bluetooth

Cabled connection

Turn off S11.
Connect the cable to your left speaker unit and twist the cable to lock in place.

Customizing your sound in the AIAIAI App

Tune the frequency response to your preferences with the predefined sound profiles or customizable 5-band EQ with the AIAIAI mobile app.

Connect S11 to your phone using Bluetooth.
Go to ‘Sound Profiles’ in the AIAIAI app and adjust the EQ.

Please note: EQ settings (presets or custom EQ setups) set in the AIAIAI app will work when connected to transmitter (W+ mode) and connected via Bluetooth.