How to connect the H10 Headband: Bluetooth & Wireless+

The H10 Headband are part of our preset: TMA-2 STUDIO WIRELESS+. You can also add it to your custom TMA-2 set in our TMA-2 Builder, purchase it in the H10-X01 Bundle, or individually on the H10 Product page.

With the H10 Headband in your headphone-configuration, you can connect wirelessly to your device via Wireless+ for ultra-low latency, bluetooth, or with cable.

Below you can find a guide on how to connect the H10 Headband via Wireless+ Link, Bluetooth.

H10:

Power H10 ON

• Choose mode of function on the switch - Blue for Bluetooth / White for W+ Link Ultra-low Latency Mode
• Press and hold the middle button until the LED turns on (approx. 3 sec)

Power H10 OFF

• Press and hold the middle button until the LED turns on (approx. 3 sec)

Transmitter (required for W+ Link Ultra-low Latency Mode):

X01 Transmitter (Default W+ option for H10): 

• Press and hold the button until the LED’s turns on (approx. 3 sec)

X02 Transmitter (H10 firmware update required): 

• If connecting to audio using USB-C:
  • X02 turns on when connected

• If connecting to audio using 3.5mm mini-jack:     
  • Connect the USB-C socket to a 5V/>2A adapter (ex. phone charger or power bank).

Option 1: How to connect H10 via Wireless+ Link for wireless ultra-low latency

1. Slide the switch on your H10 headband to W+ Link mode (white) and power on
2. Enter pairing mode on H10: Press and hold the top and bottom button until LED flashes quickly

1. Pairing with X01 Transmitter (Default for H10):
   1. Power on X01.
   2. Double press the button to enter pairing mode (LEDs blinking fast).
   3. Pairing is successful when the LED on H10 and X01 both are solid white.
2. Pairing with X02 Transmitter (NB: Make sure your H10 is updated to be compatible with X02):
   1. Connect X02 to power-source. 
   2. The first time X02 is powered on, it will start in pairing mode automatically. To enter pairing mode manually: Hold the button on X02 for 2 sec.
   3. LED 1 is solid white when the first device pairs. If you have a second device, LED 2 is solid white when it pairs.

Video demonstration for pairing H10-X01:

Option 2: How to connect H10 via Bluetooth Pairing

1. Slide the switch on your H10 headband to Bluetooth mode (blue) and power on
2. Enter pairing mode on H10: Press and hold the top and bottom button until LED flashes quickly (approx. 3 sec)
3. Activate pairing mode on your connecting device and look for "AIAIAI TMA-2 (H10)".
4. Pairing is successful when the LED on the H10 headband is solid blue.